Home > Products > NETGEAR > Wireless > Access Point > WNDAP330

WNDAP330

Wireless controllers for your wireless network.

 

WNDAP330

Specification

 

Standards

  • IEEE 802.11n draft 2.0 specification, 2.4 GHz and 5.0 GHz
  • IEEE 802.11a 5.0 GHz
  • IEEE 802.11g, IEEE 802.11b, 2.4 GHz
  • WMM - Wi-Fi Multimedia prioritization
  • Wireless Distribution System
  • IEEE 802.3af Power over Ethernet (PoE)

Physical Specifications

  • Dimensions: 32 x 190 x 124 mm (1.25 x 7.5 x 4.9 in)
  • Weight: (.56 kg) 1.2 lb

Physical Interfaces

  • One (1) 10/100/1000BASE-T Gigabit Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support
  • Power adapter: 12V DC, 1.2A; plug is localized to country of sale
  • Six (6) LEDs: Power, test, 100/1000 Mbps, link/ACT, 2.4 GHz band, 5.0 GHz band
  • One (1) console port with standard RS-232C interface with DB-9 male connector
  • Three (3) reverse SMA antenna connectors
    Note: Not recommended for use with ProSafe Antennas ANT2405, ANT2409 or ANT24D18.

Power over Ethernet Required

  • Up to 12.8W

Security

  • Wi-Fi Protected Access (WPA, WPA2)
  • Wired Equivalent Privacy (WEP) 64-bit, 128-bit encryption for IEEE 802.11b and IEEE 802.11g
  • IEEE 802.1x RADIUS authentication with EAP TLS, TTLS, PEAP
  • Wireless access control to identify authorized wireless network devices
  • MAC address authentication
  • VPN pass-through support
  • Secure SSH telnet
  • Secure Sockets Layer (SSL) remote management login
  • Ability to configure 16 BSSIDs and VLANs to provide more granular access to the network based upon user type 

Network Management

  • Remote configuration and management through Web browser, SNMP or telnet with Command Line Interface (CLI)
  • SNMP management supports SNMP MIB I, MIB II, 802.11 MIB and proprietary configuration MIB

Advanced Wireless Features

  • Point-to-point wireless bridge mode
  • Point-to-multipoint wireless bridge mode
  • Repeater mode
  • Simultaneous wireless bridge and access point mode
  • Wireless Distribution System (WDS)
  • Adjustable transmit power control (TPC) from 100 mW down to 0 mW

Warranty

  • Access point: NETGEAR Lifetime Warranty
  • Power supply: 3-year warranty

Package Contents

  • ProSafe 802.11n‡ Dual Band Wireless Access Point (WNDAP330)
  • Ethernet cable
  • Wall-mount kit
  • Installation guide
  • Resource CD
  • 12V, 1.2A power adapter, localized to country of sale
  • Warranty/support information card

Related Products
Wireless

  • Notebooks:
    - RangeMax™ Wireless Notebook Adapter (WN511B)
    - RangeMax™ Wireless USB 2.0 Adapter (WN111)
    - RangeMax™ Dual Band Wireless USB 2.0 Adapter (WNDA3100)
  • Desktops:
    - RangeMax™ Wireless PCI Adapter (WN311B)
    - RangeMax™ Wireless USB 2.0 Adapter (WN111)
    - RangeMax™ Dual Band Wireless USB 2.0 Adapter (WNDA3100)
  • Storage:
    - ReadyNAS™ NV+ 4-Bay Gigabit Desktop Network Storage (RND4000)

Ordering Information

  • North America: WNDAP330-100NAS
  • Europe: WNDAP330-100ISS
  • UK: WNDAP330-100UKS
  • Asia: WNDAP330-100AUS

ProSupport Service Packs Available
OnCall 24x7, Category 1

  • PMB0331-100 (US)
  • PMB0331 (non-US)

XPressHW, Category 1

  • PRR0331

 

Copyright 2012© ICT Technologies & Services Limited. All right reserved.