WG302

Wireless

• Standards: IEEE 802.11g 54 Mbps
• Antennas: Two (2) 5 dBi detachable
• Typical maximum power output: 19.8 dBm
• Typical maximum receive sensitivity: 96 dB
  Note: Maximum Tx varies based on country and/or region selection to ensure local regulatory compliance

Physical Interfaces

• LAN Port: One (1) 10/100BASE-T Ethernet
• (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support
• Power adapter: Output 12V DC, 1.2A; plug is localized to country of sale
• Five (5) LEDs: Power, test, 100 Mbps, link/ACT and WLAN 802.11g
• Console Port: One (1) with standard RS-232C interface with DB-9 male connector
• Antenna Connectors: Two (2) reverse SMA

Network Management

• Remote configuration and management through Web browser, SNMP or telnet with command line interface (CLI)
• SNMP management supports SNMP MIB I, MIB II, and 802.11 MIB

Advanced Wireless Features

• Bridging and repeater mode
• Simultaneous wireless bridge and access point mode
• Adjustable transmit power control 100 mW down to 0 mW
• Supports voice priority with support from SpectraLink
• Wi-Fi Multimedia (WMM™) to optimize audio, video and voice applications
• Rogue AP Detection

Receive Sensitivity

• 802.11b
  1 Mbps -93 dBm
  2 Mbps -92 dBm
  5.5 Mbps -92 dBm
  11 Mbps -89 dBm
• 802.11g
  6 Mbps -93 dBm
  9 Mbps -90 dBm
  12 Mbps -90 dBm
  18 Mbps -88 dBm
  24 Mbps -84 dBm
  36 Mbps -80 dBm
  48 Mbps -76 dBm
  54 Mbps -75 dBm

Power over Ethernet Required

• Up to 5.0W

Security

• Wi-Fi Protected Access 2 (WPA2 enterprise), 802.11i
• Block SSID Broadcast
• VPN pass-through support
• MAC address filtering with access control lists – up to 256 users
• 802.1x RADIUS support with EAP TLS, TTLS, PEAP
• Secure Shell (SSH) telnet
• Secure Socket Layer (SSL) remote management login
• Wireless isolation enables peer-topeer blocking so users may not access another user’s PC
• Ability to configure 8 BSSIDs and VLANs to provide more granular access to the network based upon user type 

Standards, Safety and Electromagnetic Conformance

• IEEE 802.11g (2.4 GHz Frequency Band, DSSS Modulation Type)
• IEEE 802.3af Power over Ethernet (PoE)
• FCC Part 15 Subpart B and Subpart C
• CE EN 60950, EN 300328-2 v1.1.1
  (2000-07), EMC EN 301489-1 v1.2.1
  (2000-08), and EN 301489-17 v1.1.1
  (2000-09), EN 55022(B), CISPR 22(B), AS/NZS 3548(B)

Physical Specifications

• Dimensions: 25.4 x 17.8 x 3.18 cm (10 x 7 x 1.25 in)
• Weight: 574 g (1.27 lb)
• Processor and memory: Intel® IXP422, 8 MB
• Flash, 16 MB DRAM

Environmental Specifications

• Operating temperature: 0° to 40° C (32° to 104° F)
• Operating humidity: 90% maximum relative humidity, non-condensing

Warranty

• Access point: NETGEAR Lifetime Warranty†
• Power supply: NETGEAR 3-year Warranty

Package Contents

• ProSafe Wireless Access Point 802.11g (WG302)
• Two (2) 5 dBi detachable Antennas
• Resource CD
• Power adapter
• Ethernet cable
• Wall-mounting kit
• Installation guide
• Warranty/support information card

NETGEAR Related Products
Adapters

• WAG511 Dual Band 802.11a/b/g Wireless PC Card
• WG511T 108 Mbps Wireless PC Card
• WG311T 108 Mbps Wireless PCI Adapter

Antennas and Accessories

• ANT24O5 5 dBi Omni-directional Antenna
• ANT2409 9 dBi Indoor/Outdoor Omni-directional Antenna
• ANT24D18v2 14dBi Indoor/Outdoor Directional Antenna
• Three (3) antenna cable lengths: 1.5m, 5m, 10m

ProSupport Service Packs Available
OnCall 24x7, Category 1

• PMB0331-100 (US)
• PMB0331-100 (non-US)

XPressHW, Category 1

• PRR0331

Ordering Information

• Asia & Japan: WG302AJP
• Australia: WG302AU
• Europe: WG302GE
• North America: WG302NA
• United Kingdom: WG302UK