Home > Products > NETGEAR > Wireless > Access Point > WG102

WG102

 

WG102

Specification

 

Wireless

  • Standard: IEEE 802.11g 54 Mbps
  • Antennas: One (1) 5 dBi detachable 2.4 GHz

Physical Interfaces

  • LAN Port: One (1) 10/100BASE-T Ethernet (RJ-45) port with Auto Uplink™ (Auto MDI-X) with IEEE 802.3af Power over Ethernet (PoE) support 
  • Four (4) LEDs: Power, test, 100 Mbps, Link/ACT, and WLAN 802.11g 
  • Antenna Connector: One (1) reverse SMA

Network Management

  • Remote configuration and management through Web browser
  • SNMP management supports private MIB

Advanced Wireless Features

  • WDS point-to-point wireless bridge mode
  • WDS point-to-multipoint wireless bridge mode
  • WDS point repeater mode
  • Adjustable Transmit Power Control (TPC) from 100 mW down to 0 mW 

Typical Maximum Power Output

  • 802.11b mode, 1 to 11 Mbps +19 dBm
  • 802.11g mode, 6 to 24 Mbps +18 dBm
  • 802.11g mode, 36, 48 and 54 Mbps +17/16/16 dBm

Receive Sensitivity

  • 802.11b
    1 Mbps -93 dBm
    2 Mbps -91 dBm
    5.5 Mbps -89 dBm
    11 Mbps -87 dBm
  • 802.11g
    6 Mbps -89 dBm
    9 Mbps -88 dBm
    12 Mbps -97 dBm
    18 Mbps -85 dBm
    24 Mbps -82 dBm
    36 Mbps -79 dBm
    48 Mbps -75 dBm
    54 Mbps -73 dBm
    108 Mbps -71 dBm

Power Consumption

  • Power adapter: Output 12V DC, 1.2A; plug is localized to country of sale 
  • PoE power consumption: Up to 4.3W

Security

  • Wi-Fi Protected Access™ (WPA2-Enterprise) and 802.11i
  • Block SSID broadcast
  • VPN pass-through support
  • MAC address filtering with access control lists – up to 128 users
  • 802.1x RADIUS support with EAP TLS, TTLS, PEAP
  • Ability to configure 8 BSSIDs and VLANs to provide more granular access to the network based upon user type

Standards, Safety and Electromagnetic Conformance

  • IEEE 802.11g (2.4 GHz frequency band, DSSS modulation type)
  • IEEE 802.3af Power over Ethernet (PoE)
  • FCC Part 15 Subpart B and Subpart C
  • CE EN 60950-1 (2001), EN 301 489-17 V1.2.1 (2002), EN 301 489-1 V1.4.1 (2002), EN 300 328-1 (2001-12), EN 300 328-2 (2001-12), R&TTE Directive 99/5/EC, CISPR 22(B), AS/NZS 3548 (B) 
  • Plenum rated

Physical Specifications

  • Dimensions: (w x d x h) 14.1 x 10 x 2.7 cm (5.56 x 3.94 x 1.06 in)
  • Weight: 386 g (.85 lb)

Environmental Specifications

  • Operating temperature: 0° to 40° C (32° to 104° F)
  • Operating humidity: 90% maximum relative humidity, non-condensing

Warranty

  • Access point: NETGEAR Lifetime Warranty†
  • Power supply: NETGEAR 3-year Warranty

ProSupport™ Service Packs Available
OnCall 24x7

  • PMB0331-100 (US)
  • PMB0331 (non-US)

XPressHW

  • PRR0331

Package Contents

  • ProSafe 802.11g Wireless Access Point (WG102)
  • One (1) 5 dBi detachable antenna
  • Resource CD
  • Power adapter
  • Ethernet cable
  • Installation guide
  • Warranty/support information card

Antennas and Accessories

  • ANT24O5 ProSafe 5 dBi Omni-directional antenna
  • ANT2409 ProSafe 9 dBi Indoor/Outdoor Omni-directional Antenna
  • ANT24D18 ProSafe 18 dBi Indoor/Outdoor Directional antenna
  • Three (3) antenna cable lengths: 1.5, 5, and 10m 

NETGEAR Related Products

  • FS108P ProSafe 8-port 10/100 Desktop Switch with PoE
  • FS116P ProSafe 16-port 10/100 Desktop Switch with PoE
  • WAG511 Dual Band 802.11a/b/g Wireless PC Card
  • WG511T 108 Mbps Wireless PC Card
  • WG311T 108 Mbps Wireless PCI Adapter
  • WAG102 ProSafe Dual Band Wireless Access Point
  • WFS709TP Smart Wireless Controller 

Ordering Information

  • North America: WG102NA  
  • Europe - General: WG102IS
  • Europe - UK: WG102UK
  • Asia: WG102AU
Copyright 2012© ICT Technologies & Services Limited. All right reserved.