WFS709TP

Physical Specifications

• Dimensions (h x w x d): 4.45 x 44.2 x 33 cm (1.75 x 17.4 x 13 in)
• Weight: 4.5 kg (10 lb)

Hardware

• Memory: Flash/RAM - 256 MB, CompactFlash - 256 MB RAM 
• CPU
• LAN port 10/100: Eight 10/100Base-T PoE ports and one 10/100/1000Base-T uplink port
• Auto-MDIX-MDI-X
• Serial port: For serial console access only
• MTBF 5 years/43,800 hours
• LEDs to indicate power, port configuration and activity
• Operating temperature: 0˚- 40˚ C
• Operating humidity: 10% - 70%
• Storage temperature: 0˚- 50˚ C
• Storage humidity: 5% - 95% RH

Electrical Specifications

• Power consumption: 200W maximum
• AC input voltage: 110 - 240V AC
• AC input frequency: 50 - 60 Hz

Wireless Controller Performance and Capacity

• Controlled access points: 16, supports 16 users each on average
• NETGEAR ProSafe WGL102
• NETGEAR ProSafe WAGL102
• Users: 256
• MAC Addresses: 4096
• VLAN IP Interfaces: 128
• Fast Ethernet ports: 8
• Gigabit Ethernet ports: One 10/100/1000Base-T
• Total throughput: 1 Gbps
• Encrypted throughput (3DES & AES-CCM): 200 Mbps

Wireless LAN Security and Control Features

• 802.11i security (WPA2 and WPA)
• 802.1x user and machine authentication
• EAP-PEAP, EAP-TLS, and EAP-TTLS support
• 802.11i PMK caching for fast-roaming applications
• EAP offload for AAA server scalability and survivability
• Stateful 802.1x authentication for standalone APs
• MAC address, SSID and location-based authentication
• Multi-SSID support for operation of multiple WLANs
• SSID-based RADIUS server selection
• Simultaneous centralized and distributed WLAN support

Identity-Based Security Features

• Wired and wireless user authentication
• Captive portal; 802.1x and MAC address authentication
• Username, IP Address, MAC address and encryption key binding for strong network identity creation
• Per-packet identity verification to prevent impersonation
• RADIUS based AAA server support
• Internal user DB for AAA server failover protection
• Per-user session accounting for usage auditing
• Configurable acceptable use policies for guest access

Convergence Features

• Voice and data on a single SSID for convergence devices
• Flow-based QoS using Voice Flow Classification (VFC)
• SIP, SpectraLink (SVP), Cisco SCCP and Vocera® ALG
• Strict priority queuing for over-the-air QoS
• DiffServ marking and 802.1p support for network QoS
• On-hook and off-hook VoIP client detection
• VoIP call admission control (CAC) using VFC
• Call reservation thresholds for mobile VoIP calls
• Voice-aware RF management for ensuring voice quality
• Fast-roaming support for ensuring voice quality
• SIP early media and ring tone generation (RFC 3960)
• Per-user and per-role rate limits (bandwidth contracts)

IntelliFi Radio Management Features

• Automatic channel and power settings for controlled APs
• Simultaneous air monitoring and end user services
• Self-healing coverage based on dynamic RF conditions
• Dense deployment options for capacity optimizations
• AP load balancing based on number of users
• Coverage hole and RF interference detection
• 802.11h support for radar detection and avoidance

Wireless Intrusion Protection Features

• Integration with wireless infrastructure
• Simultaneous or dedicated monitoring capabilities
• Rogue AP detection and built-in location visualization

Networking Features and Advanced Services

• L2 and L3 switching over the air and over the wire
• VLAN pooling for easy, scalable network designs
• VLAN mobility for seamless L2 roaming
• Proxy mobile IP and proxy DHCP for L3 roaming
• Built-in DHCP server and DHCP relay
• VRRP-based N+I controller redundancy (L2)
• AP provisioning-based N+I controller redundancy (L3)
• 802.1d Spanning Tree Protocol

Wireless Controller Management Features

• RF planning and AP deployment toolkit
• Centralized AP provisioning and image management
• Live coverage and visualization heat maps
• Detailed statistics visualization for monitoring
• Remote packet capture for RF troubleshooting
• Interoperable with Ethereal®, Airopeek and AirMagnet© analyzers
• Multi-controller configuration and management
• Location visualization and device tracking
• System-wide event collection and reporting

Wireless Controller Administration Features

• Web-based user interface access over HTTP and HTTPS
• Quickstart screens for easy controller configuration
• Restricted CLI access using console, disabled by default CLI access, SSH and telnet console
• Role-based access control for restricted admin access
• Authentication access via RADIUS or internal DB
• SNMPv3 and SNMPv2 for controller monitoring
• Standard MIBS and private enterprise MIBS
• Detailed message logs with syslog event notification

Regulatory and Safety Compliance

• CE mark (external AC/DC power supplies)
• PSE Mark (external AC/DC power supplies)
• Underwriters Laboratories (UL) 60950
• Canadian Standards Association (CAN/CSA) C22.2 No. 60950
• EN 60950 / IEC 60950 CB Scheme
• FCC Part 15 Class A
• VCCI Class A
• AS/NZS CISPR 22 Class A AS/NZS4771 (C-Tick)

Warranty

• NETGEAR Lifetime Warranty†

Package Contents

• ProSafe Smart Wireless Controller (WFS709TP)
• Power cord
• Resource CD
• Serial console cable
• Rack-mount kit
• Ethernet RJ-45 Cat 5 cable
• DB9 - RJ-45 adapter
• Support information card
• Warranty/support information card

Ordering Information

• WFS709TP
• North America: WFS709TP - 100NAS
• Europe: WFS709TP - 100EUS
• Asia/Pacific: WFS709TP - 100AUS
• WAGL102
• North America: WAGL102-100NAS
• Europe: WAGL102-100EUS
• Asia/Pacific: WAGL102-100AUS
• WGL102
• North America: WGL102-100NAS
• Europe: WGL102-100EUS
• Asia/Pacific: WGL102-100AUS

ProSupport™ Service Packs Available

• OnCall 24x7, Category 3
• PMB0333
• XPressHW,Category 3
  • PRR0333-100