Physical Interfaces
- RJ-45 Connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink™ on all ports):
- GSM7328S 24 ports
- GSM7328FS 4 ports
- GSM7352S 48 ports
- Small form-factor pluggable (SFP) modules for fiber Gigabit Ethernet interfaces:
- GSM7328S 4 slots
- GSM7328FS 24 slots
- GSM7352S 8 slots
- (4) 10 Gigabit Ethernet/24G Stacking Module Bays
- RS-232 Console Port
Layer 2 Services
- IEEE 802.1Q Static VLAN (Up to 4k VLAN ID)
- IEEE 802.1p Class of Service (CoS)
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1v Protocol VLAN & Port VLAN
- IEEE 802.1 Q-inQ
- IEEE 802.1w Rapid Spanning Tree
- IEEE 802.1s Multiple Spanning Tree
- IEEE 802.3ad Link Aggregation (LACP) up to 48 trunks
- IEEE 802.1x Port Access Authentication
- IGMP v1, v2, v3 Snooping Support
- Network Storm Protection including Broadcast, multicast and unicast traffic
- Static multicast filtering
- Port locking
- Ingress Rate Limit in 1Kbps increments
- GARP/GVRP/GMRP
Layer 3 Services
- VLAN routing
- Port routing
- RIP v1/v2 (RFC 1058, 2453)
- OSPF v2 (RFC 1583, 2328)
- OSPF Equal Cost Multipath (4 - ECMP routes)
- VRRP (RFC 2338, 2787) 64 instances
- Access Control Lists (ACL) - MAC, IP, TCP
- ACLs – 1,024 Global
- COS
- DiffServ QOS (RFC 2998)
- DNS Caching
- DHCP/Bootp Relay -primary and backup (RFC3046, option 82)
Switch Management Specifications
- SNMP v1, v2c, v3 with multiple IP addresses
- RFC 1157, 1901-1910, 2574, 2575
- RFC 768 UDP
- UDP Relay
- RFC 854-859 telnet
- RFC 951 BootP
- RFC 1213 MIB II
- RFC 1757 RMON groups 1,2,3, and 9
- RFC 1215 SNMP Traps
- RFC 1493 Bridge MIB
- RFC 1643 Ethernet Interface MIB
- RFC 1534 DHCP and BootP Interoperation
- RFC 2131, 2132 DHCP and BootP
- DHCP relay (with backup servers)
- RFC 2865 RADIUS (both switch and management access)
- RFC 2866 RADIUS Accounting
- Private Enterprise MIB
- Port Mirroring Support
- RFC 2236 IGMP v2
- IGMP Querier
- RFC 2030 Simple Network Time Protocol (SNTP)
- RFC 1027 Proxy ARP
- SYSLOG
- Firmware upgrade via TFTP or HTTP
- RFC 1519 CIDR
- Proxy ARP
- DNS lookup
- Port Description
Single IP Address Management
(firmware version 7.3 or higher)
- Manage up to 48 fully managed switched
- Feature can be used with the following models:
- FSM726E, FSM7226RS, FSM7250RS
- FSM7328S, FSM7352S, FSM7328S, FSM7352PS
- GSM7224R, GSM7248R
- GSM7328S, GSM7328FS, GSM7352S
Performance Specifications
- Forwarding modes: Store-and-forward
- GSM7328S/GSM7328FS: 144 Gbps; 107.1 Mpps
- GSM7352S: 192 Gbps; 285.7 Mpps
- Switch latency: < 6 us for 64-byte frames (10G to 10G) < 2 us for 64-byte frames (1G to 1G)
- System memory: 256 MB
- Packet buffer memory: 334 KB embedded memory per port
- Code Storage (Flash): 32 MB
- Address database size: 8K media access control (MAC) addresses
- Number of VLANs: 512
- Number of trunks: 48
- Number of Queues: 8
- Number of routes: 512
- Jumbo frame support: up to 9K packet size
- Acoustic noise:
- GSM7328S 52.4 dB
- GSM7328FS 51.7 dB
- GSM7352S 52.8 dB
- Heat Dissipation:
- GSM7328S 273.12 BTU/hr
- GSM7328FS 266 BTU/hr
- GSM7352S 375.54 BTU/hr
- Mean time between failures (MTBF): 117,747 hours (~ 13.4 years)
User Interfaces
- Command Line Interface (CLI) via console port
- Web-based management via embedded HTTP server protected with Secured Sockets Layer
- (SSLv3) or Transport Layer Security (TLS v1)
- Telnet remote login (5 sessions) securable with Secured Shell (SSH v1.5, v2)
LEDs
- Per port: Speed, link, activity
- Per device: Power, fan status, stack ID, RPS, master
Network Standards Compatibility
- IEEE 802.3i 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3u 100BASE-FX*
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-X
- IEEE 802.3x Flow Control
- IEEE 802.3ae 10000BASE-X *Tested with Fiberxon SFP Modules
Physical Specifications
- Dimensions (w x d x h): 440 x 385 x 43 mm (17.32 x 15.16 x 1.7 in)
- Weight: GSM7328S 4.5kg (10lb); GSM7352S 5.4 kg (12lb); GSM7328FS 5.4kg (12lb)
Environmental Specifications
- Operating temperature:
- GSM7328S/GSM7352S: 0° to 40° C (32 to 104° F)
- GSM7328FS: 0° to 50° C (32 to 122° F) Thermal sensor with SNMP trap settings
- Storage temperature: -20° to 70° C (-4 to 158° F)
- Operating humidity: 90% maximum relative humidity, non-condensing
- Storage humidity: 95% maximum relative humidity, non-condensing
- Operating altitude: 3,000 m (10,000 ft) maximum
- Storage altitude: 3,000 m (10,000 ft) maximum
Electrical Specifications
- Power Consumption:
- GSM7328S 80 W maximum
- GSM7328FS 78 W maximum
- GSM7352S 110 W maximum
Electromagnetic Emissions
- CE mark
- EN55022 Class A - Emissions
- EN55024 - Immunity
- FCC Part 15 Class A
- VCCI Class A
- C-Tick
Electromagnetic Safety
- CE mark
- EN 60950-1
- UL/cUL 60950-1
Modules
- ProSafe AGM731F 1000BASE-SX SFP GBIC
- ProSafe AGM732F 1000BASE-LX SFP GBIC
- ProSafe AGM733 1000BASE-ZX SFP GBIC
- ProSafe AX741 10 Gigabit Ethernet XFP Adapter
- ProSafe AX742 24 Gigabit Stackable Module
- ProSafe AXM751 10GBASE-SR XFP GBIC
- ProSafe AXM752 10GBASE-LR XFP GBIC
Warranty
- NETGEAR Lifetime Warranty†
Package Contents
- ProSafe Gigabit L3 Managed Switch (GSM7328S, GSM7328FS or GSM7352S)
- Null modem cable
- Rubber footpads
- Power cable
- Rack-mount kit
- Installation Guide
- Resource CD-ROM
- Warranty/Support information card
Ordering Information
- North America
- GSM7328SNA
- GSM7328FS-100NAS
- GSM7352SNA
- Europe
- GSM7328SEU
- GSM7328FS-100EUS
- GSM7352S
- Asia
- GSM7328SAU
- GSM7328FS-100AUS
- GSM7352SAU
- Japan
- GSM7328SJP
- GSM7328FS-100JPS
- GSM7352SJP
Modules
- AGM731F
- AGM732F
- AGM733
- AX741
- AX742
- AXM751
- AXM752
ProSupport™ Service Packs Available
GSM7328FS & GSM7328S
OnCall 24x7, Category 3
XPressHW, Category 3
|