GS748AT

GS748AT

Specification

Network Protocol and Standards Compatibility

• IEEE 802.3 10BASE-T
• IEEE 802.3u 100BASE-TX
• IEEE 802.3ab 1000BASE-T
• IEEE 802.3z 1000BASE-X
• IEEE 802.3x full-duplex flow control

Interfaces

• 48 10/100/1000 Mbps switching ports
• 4 built-in shared SFP Gigabit Ethernet fiber ports for 100/1000 Mbps connectivity
• Auto-sensing and auto-negotiating capabilities for all copper ports
• Auto Uplink™ on all ports to make the right connection

Administrative Switch Management

• IEEE 8021.Q VLAN (128 groups, Static)
• Auto-Voice VLAN
• IEEE 802.1p Class of Service (CoS)
• IEEE 802.3ad static or dynamic link aggregation (LACP)
• IEEE 802.1D Spanning Tree Protocol
• IEEE 802.1ab LLDP & LLDP-MED
• SNMP v1, v2c, v3
• RFC 1213 MIB II
• RFC 1643 Ethernet Interface MIB
• RFC 1493 Bridge MIB
• RFC 2131 DHCP client
• RMON group 1, 2, 3, 9
• Private Enterprise MIB
• IEEE 802.1x (RADIUS)
• RADIUS accounting
• Access control list (ACL)
• Layer 3 Quality of Service (QoS)
• TACACS+
• RADIUS accounting
• Port-based security by locked MAC addresses
• Protected ports
• IGMP snooping
• Storm control for broadcast, multicast and unknown unicast packets
• Port-based ingress/egress rate limiting
• SNTP
• Port mirroring support
• Web-based configuration
• Configuration backup/restore
• Password access control
• Firmware upgradeable
• Cable test

Performance Specifications

• Forwarding modes: Store-and-forward
• Bandwidth: 98 Gbps
• Network latency: Less than 3 microseconds for 64-byte frames in store-and-forward mode for 1000 Mbps to 1000 Mbps transmission
• Buffer memory: 6 MB
• Address database size: 8,000 media access control (MAC) addresses per system
• Addressing: 48-bit MAC address
• Mean time between failures (MTBF):
• 208,700 hours (~ 23.8 years)

LEDs

• Unit: Power, fan
• Per port: Link, speed, activity
• Per Gigabit port: Link, speed, activity

Power Supply

• Power consumption: 66.9W
• 100-240V AC/50-60 Hz universal input

Dimensions (h x w x d):

• 43 x 440 x 257 mm
  (1.7 x 17.3 x 10.1 in)

Weight:

• 5.0 kg (11 lb)

Environmental Specifications

• Operating temperature: 32° to 131° F
  (0° to 55° C)
• Storage temperature: -4° to 158° F
  (-20° to 70° C)
• Operating humidity: 90% maximum relative humidity, non-condensing
• Storage humidity: 95% maximum relative humidity, non-condensing
• Operating altitude: 10,000 ft
  (3,000 m) maximum
• Storage altitude: 10,000 ft
  (3,000 m) maximum

Electromagnetic Compliance

• CE mark, commercial
• FCC Part 15 Class A
• VCCI Class A
• EN 55022 (CISPR 22)
• EN 55024 (CISPR 24)
• C-Tick

Safety

• CE mark, commercial
• CUL 60950 (Listed)/ EN 60950

Warranty

• NETGEAR Lifetime Warranty†

System Requirements

• Category 5 network cables
• Network card for each PC
• Network software (e.g., Windows®)

Package Contents

• ProSafe 48-port Gigabit Smart Switch with Advanced Features (GS748AT)
• Rubber footpads
• Power cord
• Rack-mount kit
• Resource CD installation guide with Smart Wizard Discovery program
• Warranty/support information card

Modules

• AGM731F ProSafe 1000BASE-SX SFP GBIC: Module with LC connectors for 50um or 62.5um multi-mode fiber cable
• AGM732F ProSafe 1000BASE-LX SFP GBIC: Module with LC connectors for 9um single-mode fiber cable
• AGM733 ProSafe 1000BASE-LZ SFP GBIC: Module with LC connectors for 9um single-mode fiber cable

Ordering Information

• GS748AT
  North America: GS748AT-100NAS
  Europe: GS748AT-100EUS
  Asia: GS748AT-100AJS

ProSupport Service Packs Available

• OnCall 24x7, Category 1
• PMB0331-100 (U.S. only)
• PMB0331
• XPressHW, Category 1
• PRR0331