Home > Products > NETGEAR > Switches > Advanced Smart Switches > GS724TS

GS724TS

 

GS724TS

Specification

 

Network Protocol and Standards Compatibility

  • IEEE 802.3 10BASE-T
  • IEEE 802.3u 100BASE-TX
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3z 1000BASE-X
  • IEEE 802.3x full-duplex flow control

Interfaces

  • GS724TS: 24 10/100/1000 Mbps switching ports
  • GS748TS: 48 10/100/1000 Mbps switching ports
  • 4 Built-in shared SFP Gigabit Ethernet fiber ports for 100/1000 Mbps connectivity
  • 2 HDMI ports on the rear of the unit – used for stacking only
  • Auto-sensing and auto-negotiating capabilities for all copper ports
  • Auto Uplink™ on all ports to make the right connection

Administrative Switch Management

  • IEEE 802.1Q VLAN (128 groups, Static)
  • Management VLAN
  • IEEE 802.1p Class of Service (CoS)
  • 4 hardware queues
  • Port-based QoS
  • IEEE 802.3ad Static or Dynamic Link Aggregation (LACP)
  • IEEE 802.1D Spanning Tree Protocol
  • IEEE 802.1w Rapid Spanning Tree Protocol
  • IEEE 802.1s Multiple Spanning Tree Protocol
  • SNMP v1, v2c, v3
  • RFC 1213 MIB II
  • RFC 1643 Ethernet Interface MIB
  • RFC 1493 Bridge MIB
  • RFC 2131 DHCP client
  • IEEE 802.1x (RADIUS)
  • RADIUS accounting
  • Layer 3 (DSCP) Quality of Service (QoS)
  • TACACS+
  • Port-based security by locked MAC addresses
  • TCP/UPD-based priority mapping
  • IGMP snooping v1, v2, v3
  • MAC and IP address ACL
  • Storm control for broadcast, multicast and unknown unicast packets
  • Port-based ingress/egress rate limiting
  • SNTP
  • RMON group 1, 2, 3, 9
  • Private Enterprise MIB
  • Port mirroring – many-to-one
  • IEEE 802.3ab LLDP
  • LLDP-MED
  • Protected ports
  • Cable test
  • Web-based configuration
  • Configuration Backup/Restore
  • Password Access Control
  • Firmware upgradeable

Performance Specifications

  • Forwarding modes: Store-and-forward
  • Bandwidth: 48 Gbps for GS724TS, 96 Gbps for GS748TS
  • Stacking up to 6 switches or 288 ports per stack
  • Stacking bandwidth: 20 Gbps
  • Network latency: Less than 20 microseconds for 64-byte frames in store-and-forward mode for 1000 Mbps to 1000 Mbps transmission
  • Buffer memory:
    • GS724TS: 2 Mb
    • GS748TS: 6 Mb 
  • Address database size: 8,000 media access control (MAC) addresses per system
  • Addressing: 48-bit MAC address
  • Mean time between failures (MTBF): 167,300 hours (~19 years) for GS724TS 125,500 hours (~14 years) for GS748TS

LEDs

  • Unit: Power, fan, stack master, stack ID, PoE max
  • Per port: Link, speed, activity, stack

Power Supply

  • Power consumption: 35.1W for GS724TS, 78.36W for GS748TS
  • 100-240V AC/50-60 Hz universal input

Physical Specifications

  • Dimensions: (h x w x d):
    • GS724TS: 43.2 x 440 x 205 mm (1.70 x 17.32 x 8 in)
    • GS748TS: 43.2 x 440 x 300 mm (1.70 x 17.32 x 11.8 in)
  • Weight:
    • GS724TS: 2.87 kg (6.33 lb)
    • GS748TS: 5.16 kg (11.38 lb)

Environmental Specifications

  • Operating temperature: 32° to 122° F (0° to 50° C)
  • Storage temperature: -4° to 158° F (-20° to 70° C)
  • Operating humidity: 90% maximum relative humidity, non-condensing
  • Storage humidity: 95% maximum relative humidity, non-condensing
  • Operating altitude: 10,000 ft (3,000 m) maximum
  • Storage altitude: 10,000 ft (3,000 m) maximum

Electromagnetic Compliance

  • CE mark, commercial
  • FCC Part 15 Class A
  • VCCI Class A
  • EN 55022 (CISPR 22)
  • EN 55024 (CISPR 24)
  • C-Tick

Safety

  • CE mark, commercial
  • CUL 60950 (Listed)/EN 60950 (Low Voltage Directive)

System Requirements

  • Category 5 UTP Network cables or better
  • Network card for each PC
  • Network software (e.g., Windows®)

Warranty

  • NETGEAR Lifetime Warranty†

ProSupport™ Service Packs Available
OnCall 24x7, Category 1

  • PMB0331-100 (US)
  • PMB0331 (non-US)

XPressHW, Category 1

  • PRR0331

Package Contents

  • ProSafe 24 or 48-port Gigabit Smart Stackable Switch (GS724TS or GS748TS)
  • Rubber footpads
  • Power cord
  • One stacking cable
  • HDMI stacking cable
  • Rack-mount kit
  • Resource CD installation guide
  • Warranty/support information card

Modules

  • AGM731F ProSafe 1000BASE-SX SFP GBIC: Module with LC connectors for 50um or 62.5um multi-mode fiber cable
  • AGM732F ProSafe 1000BASE-LX SFP GBIC: Module with LC connectors for 9um single-mode fiber cable
  • AGM733 ProSafe 1000BASE-ZX SFP GBIC: Module with LC connectors for 9um single-mode fiber cable

Ordering Information
GS724TS

  • North America: GS724TS-100NAS
  • Europe: GS724TS-100EUS
  • Asia: GS724TS-100AUS
  • Japan: GS724TS-100JPS

GS748TS

  • North America: GS748TS-100NAS
  • Europe: GS748TS-100EUS
  • Asia: GS748TS-100AUS
  • Japan: GS748TS-100JPS

 

Copyright 2012© ICT Technologies & Services Limited. All right reserved.