Home > Products > NETGEAR > Switches > Advanced Smart Switches > GS724TR

GS724TR

 

GS724TR

Specification

 

Network Protocol and Standards Compatibility:

  • IEEE 802.3 10BASE-T
  • IEEE 802.3u 100BASE-TX
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3z 1000BASE-X
  • IEEE 802.3x full-duplex flow control

Interfaces

  • GS724TR: 24 10/100/1000 Mbps switching ports
  • GS748TR: 48 10/100/1000 Mbps switching ports
  • 2 or 4 built-in shared SFP Gigabit Ethernet fiber ports for 100/1000 Mbps connectivity
  • Auto-sensing and auto-negotiating capabilities for all copper ports
  • Auto Uplink™ on all ports to make the right connection

Administrative Switch Management

  • 32 static routes
  • ICMP Router Discovery Protocol (IRDP)
  • IEEE 8021.Q VLAN (255 groups, Static)
  • IEEE 802.1p Class of Service (CoS)
  • DSCP 
  • IEEE 802.3ad static or dynamic link aggregation (LACP)
  • IEEE 802.1D Spanning Tree Protocol
  • IEEE 802.1w Rapid Spanning Tree Protocol
  • IEEE 802.1S Multiple Spanning Tree Protocol
  • BPDU flooding
  • IGMP snooping v1/v2
  • SNMP v1, v2c, v3
  • RFC 1213 MIB II
  • RFC 1643 Ethernet Interface MIB
  • RFC 1493 Bridge MIB
  • RFC 2131 DHCP client
  • RFC 2737 Entity MIB
  • RFC 2674 – P-Bridge MIB
  • RFC 2674 – Q-Bridge MIB
  • RMON group 1, 2, 3, 9
  • Private Enterprise MIB
  • IEEE 802.1x (RADIUS)
  • Access control list (ACL)
  • Layer 3- and 4-based Quality of Service (QoS)
  • TACACS+
  • RADIUS accounting
  • Port-based security by locked MAC addresses
  • Storm control for broadcast, multicast and unknown unicast packets
  • Port-based ingress/egress rate limiting SNTP
  • IEEE 802.1ab LLDP
  • LLDP-MED
  • GARP
  • Voice VLAN
  • Protected ports
  • Port mirroring support
  • Web-based configuration
  • HTTP and HTTPS
  • Configuration backup/restore
  • Password access control
  • DHCP filter
  • DHCP relay
  • Denial-of-service (DoS) prevention
  • Dual Image
  • Firmware upgradeable
  • Syslog
  • Ping & traceroute

Performance Specifications

  • Forwarding modes: Store-and-forward
  • Bandwidth
    GS724TR: 48 Gbps
    GS748TR: 96 Gbps
  • Network latency: Less than 5 microseconds for 64-byte frames in store-and-forward mode for 1000 Mbps to 1000 Mbps transmission
  • Buffer memory: 750 KB
  • Address database size: 8,000 media access control (MAC) addresses per system
  • Addressing: 48-bit MAC address
  • Mean time between failure (MTBF):
    GS724TR: 265,404 hours (~30 years)
    GS748TR: 196908 hours (~22 years)

Leds

  • Unit: power, fan
  • Per port: link, speed, activity

Power Supply

  • Power Consumption:
    • GS724TR: 36.8W
    • GS748TR: 71.2W
  • 100-240V AC/50-60 Hz universal input

Physical Specifications

  • Dimensions (h x w x d):
    • GS724TR: 43 x 440 x 205 mm (1.69 x 17.32 x 8.08 in)
    • GS748TR: 43 x 440 x 257 mm (1.69 x 17.32 x 10.13 in)
  • Weight:
    • GS724TR: 3.10 kg (6.83 lb)
    • GS748TR: 4.22 kg (9.30 lb)

Environmental Specifications

  • Operating temperature: 32° to 131° F (0° to 55° C)
  • Storage temperature: -4° to 158° F (-20° to 70° C)
  • Operating humidity: 90% maximum relative humidity, non-condensing
  • Storage humidity: 95% maximum relative humidity, non-condensing
  • Operating altitude: 10,000 ft (3,000 m) maximum
  • Storage altitude: 10,000 ft (3,000 m) maximum

Electromagnetic Compliance

  • CE mark, commercial
  • FCC Part 15 Class A
  • VCCI Class A
  • EN 55022 (CISPR 22)
  • EN 55024 (CISPR 24)
  • C-Tick

Safety

  • PCE mark, commercial
  • CUL 60950 (Listed)/ EN 60950 (Low Voltage Directive)

Warranty

  • NETGEAR Lifetime Warranty

Modules

  • AGM731F ProSafe 1000BASE-SX SFP GBIC: Module with LC connectors for 50um or 62.5um multi-mode fiber cable
  • AGM732F ProSafe 1000BASE-LX SFP GBIC: Module with LC connectors for 9um single-mode fiber cable
  • AGM733 ProSafe 1000BASE-LZ SFP GBIC: Module with LC connectors for 9um single-mode fiber cable

Package Contents

  • ProSafe 24- or 48-port Gigabit Smart Stackable Switch with 2 or 4 shared SFP Ports (GS724TR or GS748TR)
  • Rubber footpads
  • Power cord
  • Rack-mount kit
  • Resource CD Installation Guide
  • Warranty/support information card

Ordering Information
GS724TR

  • North America: GS724TR-100NAS
  • Europe: GS724TR-100EUS
  • Australia: GS724TR-100AUS
  • Japan: GS724TR-100JPS

GS748TR

  • North America: GS748TR-100NAS
  • Europe: GS748TR-100EUS
  • Australia: GS748TR-100AUS
  • Japan: GS748TR-100JPS

ProSupport® Information
GS724TR
OnCall 24x7, Category 1

  • PMB0331-100 (U.S. only)
  • PMB0331

XPressHW, Category 1

  • PRR0331

GS748TR
OnCall 24x7, Category 2

  • PMB0332

XPressHW, Category 2

  • PRR0332-100

 

Copyright 2012© ICT Technologies & Services Limited. All right reserved.