Home > Products > NETGEAR > Switches > Smart Switches > GS724T

GS724T

 

GS724T

Specification

 

Network Protocol and Standards Compatibility

  • IEEE 802.3 10BASE-T Ethernet
  • IEEE 802.3u 100BASE-TX Fast Ethernet
  • IEEE 802.3ab 1000BASE-T Gigabit Ethernet
  • IEEE 802.3x full-duplex flow control

Interfaces

  • GS724T: 24 RJ-45 connectors for 10BASE-T, 100BASE-TX, and 1000BASE-T (Auto Uplink on all ports)
  • GS716T: 16 RJ-45 connectors for 10BASE-T, 100BASE-TX and 1000BASE-T (Auto Uplink on all ports)
  • 2 Dual Personality SFP slots for fiber Gigabit Ethernet modules

Administrative Switch Management

  • IEEE 802.1D Spanning Tree Protocol
  • RFC 1157 SNMP v1, v2c
  • RFC 1213 MIB II
  • RFC 1643 Ethernet Interface MIB
  • RFC1493 Bridge MIB
  • Private Enterprise MIB
  • Jumbo Frame Support (up to 9216 bytes)
  • IEEE 802.1Q Tag VLAN
  • GS716T: 64 Static VLANs
    - Supports 16 port-based VLAN
  • GS724T: 128 Static VLANs
    - Supports 24 port-based VLAN
  • IEEE 802.1p (Class of Service)
  • DSCP - L3 QoS
  • Port-based QoS (options High/Normal)
  • Port Trunking - Manual as per IEEE802.3ad Link Aggregation
  • DHCP client function
  • Access Control: Trusted MAC
  • Broadcast storm control (GS724T only)
  • Port mirroring (many-to-one)
  • Port setting
  • Web-based configuration, anywhere on the network
  • Smartwizard Discovery Utility program auto discovers devices (up to 254 agents/switches); set system configuration to each agent
  • Configuration backup/restore (easy to configure more than one switch)
  • Password access control and Restricted IP Access List
  • Firmware upgradeable

Active Flow Control

  • Full-duplex IEEE 802.3x pause frame flow control
  • Half-duplex back-pressure control

Performance Specifications

  • Forwarding modes: Store-and-forward
  • Bandwidth: GS724T = 48 Gbps, GS716T = 32 Gbps
  • Network latency:
    GS716T average latency 34.8 us for 100 Mbps with 64 bytes
    GS724T average latency 10.59 us for 100 Mbps with 64 bytes
  • Buffer memory: 256 KB embedded memory per unit
  • Priority queues: 4
  • Priority queuing: Weighted Round Robin (WRR)
  • Address database size: 8,000 media access control (MAC) addresses per system
  • Addressing: 48-bit MAC address
  • Mean time between failures (MTBF):
    - GS716T = 59,500 hours (~6.8 years)
    - GS724T = 59,500 hours (~6.8 years)
  • Acoustic Noise:
    - GS724T = 41 dBA
    - GS716T = 42.5 dBA

LEDs

  • Unit: Power
  • Per port: Link, activity, speed, duplex

Power Supply

  • Power Consumption:
    - GS716T - 32W
    - GS724T - 43.2W
  • 100-240V AC/50-60 Hz universal input

Physical Specifications

  • Dimensions (h x w x d):
    - GS716T: 43 x 440 x 205 mm (1.7 x 17.3 x 8.1 in)
    - GS724T: 43 x 440 x 260 mm (1.7 x 17.3 x 10.2 in)
  • Weight:
    - GS716T: 3.5 kg (7.7 lb)
    - GS724T: 3.6 kg (7.9 lb)

Environmental Specifications

  • Operating temperature: 32° to 104°F (0° to 40° C)
  • Storage temperature: -4° to 158°F (-20° to 70° C)
  • Operating humidity: 90% maximum relative humidity, non-condensing
  • Storage humidity: 95% maximum relative humidity, non-condensing
  • Operating altitude: 10,000 ft (3,000 m) maximum
  • Storage altitude: 10,000 ft (3,000 m) maximum

Electromagnetic Compliance

  • CE mark, commercial
  • FCC Part 15 Class A
  • VCCI Class A
  • EN 55022 (CISPR 22)
  • EN 55024 (CISPR 24)
  • C-Tick

Safety Agency Approvals

  • UL listed (UL 1950)/cUL
  • IEC 950/EN 60950
  • CE mark, commercial
  • CUL 60950 (Listed)/EN 60950 (Low Voltage Directive)

Modules

  • NETGEAR ProSafe AGM731F 1000BASE-SX SFP GBIC Module with LC connectors for 50um or 62.5um multi-mode fiber cable
  • NETGEAR ProSafe AGM732F Fiber 1000BASE-LX SFP GBIC Module with LC connectors for 9um single-mode fiber cable
  • NETGEAR ProSafe AGM733 Fiber 1000BASE-ZX SFP GBIC Module with LC connectors for 9um single-mode fiber cable

Warranty

  • NETGEAR Lifetime Warranty†

ProSupport Service Packs Available
OnCall 24x7, Category 1

  • PMB0331-100 (US)
  • PMB0331 (non-US)

XPressHW, Category 1

  • PRR0331

Package Contents

  • 16- or 24-port Gigabit Smart Switch (GS716T or GS724T)
  • Rubber footpads
  • Power cord
  • Rack-mount kit
  • Smart Switch resource CD
  • Smart Switch installation guide
  • Warranty/support information card

Ordering Information
GS716T

  • North America: GS716TNA
  • Europe: GS716TEU
  • Asia: GS716TAU
  • Japan: GS716TJP

GS724T

  • North America: GS724TNA
  • Europe: GS724TEU
  • Asia: GS724TAU
  • Japan: GS724TJP

 

Copyright 2012© ICT Technologies & Services Limited. All right reserved.