Physical Interfaces
- RJ-45 Connectors for 10/100 Mbps ports (Auto Uplink™ and PoE on all ports):
-FSM7328PS 24 ports
-FSM7352PS 48 ports
- 4 RJ-45 connectors for 10/100/1000 Mbps ports with optional SFP connectors for fiber connections
- RS-232 console port
Power over Ethernet (PoE)
- FSM7328PS:
-24 ports support PoE (IEEE 802.3af)
-up to 12 ports support 15.4W each
- FSM7352PS:
-48 ports support PoE (IEEE 802.3af)
-up to 28 ports support 15.4W each
Layer 2 Services
- IEEE 802.1Q static VLAN (up to 512)
- IEEE 802.1p Class of Service (CoS)
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1v VLAN & port VLAN
- IEEE 802.1w Rapid Spanning Tree
- IEEE 802.1s Multiple Spanning Tree
- IEEE 802.3ad link aggregation (LACP) up to 6 trunks
- IEEE 802.1x port access authentication
- IGMP v1, v2 snooping support
- Network storm protection including broadcast, multicast and unicast traffic
- Static multicast filtering
- Port locking
- Ingress rate limit in 1 Kbps increments
- GARP/GVRP/GMRP
Layer 3 Services
- VLAN routing
- Port routing
- RIP v1/v2 (RFC 1058, 2453)
- OSPF v2 (RFC 1583, 2328)
- OSPF equal-cost multi-path (ECMP)
- VRRP (RFC 2338, 2787) 64 instances
- Access Control Lists (ACL) - MAC, IP, TCP
- ACLs – 1,024 Global
- COS
- DiffServ QoS (RFC 2998)
- DNS caching
- DHCP/bootp relay - primary and backup (RFC 3046, option 82)
Switch Management Specifications
- SNMP v1, v2c, v3 with multiple IP addresses
- RFC 1157, 1901-1910, 2574, 2575
- RFC 768 UDP
- UDP relay
- RFC 854-859 telnet
- RFC 951 BOOTP
- RFC 1213 MIB II
- RFC 1757 RMON groups 1,2,3, and 9
- RFC 1215 SNMP traps
- RFC 1493 Bridge MIB
- RFC 1643 Ethernet Interface MIB
- RFC 1534 DHCP and BOOTP Interoperation
- RFC 2131, 2132 DHCP and BOOTP
- RFC 2865 RADIUS (both switch and management access)
- RFC 2866 RADIUS accounting
- Private enterprise MIB
- Port mirroring support
- RFC 2236 IGMP v2
- IGMP querier
- RFC 2030 Simple Network Time Protocol (SNTP)
- RFC 1027 Proxy ARP
- SYSLOG
- Firmware upgrade via TFTP or HTTP
- Port descriptions
- RFC 1519 CIDR
- Proxy ARP
- DNS lookup
- DHCP server
- DHCP relay (with backup servers)
Single IP Address Management
- Manage up to 48 fully managed switched
- Feature can be used with the following models:
- FSM726E, FSM7226RS, FSM7250RS
- FSM7328S, FSM7352S, FSM7352S, FSM7328PS, FSM7352PS
- GSM7224R, GSM7248R
- GSM7328S, GSM7328FS, GSM7352S
Performance Specifications
- Forwarding modes: Store-and-forward
- FSM7328PS: 12.8 Gbps; 9.5 Mpps
- FSM7352PS: 17.6 Gbps; 13.1 Mpps
- Switch latency: Less than 80 microseconds for 64-byte frames
- System memory: 256 MB
- Packet buffer memory: 122 KB embedded memory per port
- Code storage (Flash): 16 MB
- Address database size: 16,000 media access control (MAC) addresses
- Number of VLANs: 512 (1-4096)
- Number of trunks: 6
- Number of queues: 8
- Number of routes: 128
- Jumbo frame support: up to 9K packet size
- Acoustic noise:
-FSM7328PS: 38.6 dB
-FSM7352PS: 60 dB
- Heat Dissipation:
-FSM7328PS: 979 Btu/hr
-FSM7352PS: 2005 Btu/hr
- Mean time between failures (MTBF):
-FSM7328PS: 210,685 hours (~ 24 years)
-FSM7352PS: 117,747 hours (~13.4 years)
User Interfaces
- Command line interface (CLI) via console port
- Web-based management via embedded HTTP server protected with Secured Sockets Layer
- (SSLv3) or Transport Layer Security (TLS v1)
- Telnet remote login (5 sessions) securable with Secure Shell (SSH v1.5, v2)
LEDs
- Per port: Speed, link, activity, PoE fault
- Per device: Power, fan status, stack ID, RPS, master, max PoE
Network Standards Compatibility
- IEEE 802.3i 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3z 1000BASE-X
- IEEE 802.3x Flow Control
- IEEE 802.3ae 10000BASE-X
- IEEE 802.3af PoE
Physical Specifications
- Dimensions (w x d x h):
- FSM7328PS: 440 x 257 x 43.2mm (17.32 x 10.12 x 1.70 in)
- FSM7352PS: (w x d x h): 440 x 385 x 43 mm (17.32 x 15.16 x 1.7 in)
- Weight:
- FSM7328PS: 3.77 kg (8.316 lb)
- FSM7352PS: 5.99 kg (13.2 lb)
Environmental Specifications
- Operating temperature:
- FSM7328PS: 0° to 50° C (32° to 122°
- FSM7352PS: 0° to 40° C (32° to 104° F) Thermal sensor with SNMP trap settings
- Storage temperature: -20° to 70° C (-4° to 158° F)
- Operating humidity: 90% maximum relative humidity, non-condensing
- Storage humidity: 95% maximum relative humidity, non-condensing
- Operating altitude: 3,000 m (10,000 ft) maximum
- Storage altitude: 3,000 m (10,000 ft) maximum
Electrical Specifications
- Power Consumption:
- FSM7328PS: Max power consumption = 285W AC; PoE budget = 192W, 8W for 24p, 15.4 for 12p
- FSM7352PS: Max power consumption = 587W AC; PoE budget = 440W, 8W for 48p, 15.4 for 28p
Electromagnetic Compatibility (EMC)
- CE mark
- EN 55022 Class A - Emissions
- EN 55024 - Immunity
- FCC Part 15 Class A
- VCCI Class A
- C-Tick
Electrical Safety
- CE mark
- EN 60950-1
- UL/cUL 60950-1
Warranty
- NETGEAR Lifetime Warranty†
Package Contents
- ProSafe Stackable L3 PoE Switch (FSM7328PS or FSM7352PS)
- Null modem cable
- Rubber footpads
- Power cable
- Rack-mount kit
- Installation Guide
- Resource CD-ROM
- Warranty/support information card
Ordering Information
North America
- FSM7328PS-100NAS
- FSM7352PSNA
Europe
- FSM7328PS-100EUS
- FSM7352PSEU
Asia
- FSM7328PS-100AUS
- FSM7352PSAU
Japan
- FSM7328PS-100JPS
- FSM7352PSJP
Modules
- ProSafe AGM731F 1000BASE-SX SFP GBIC
- ProSafe AGM732F 1000BASE-LX SFP GBIC
- ProSafe AGM733 1000BASE-ZX SFP GBIC
ProSupport® Service Packs Available
FSM7328PS
OnCall 24x7, Category 2
XPressHW, Category 2
FSM7352PS
OnCall 24x7, Category 3
XPressHW, Category 3
|
