Network Protocol and Standards Compatibility
- IEEE 802.3 10BASE-T
- IEEE 802.3u 100BASE-TX
- IEEE 802.3z 1000BASE-X
- IEEE 802.3ab 1000BASE-T
- IEEE 802.3x flow control
Layer 2 Services
- IEEE 802.1Q static VLAN (up to 512)
- IEEE 802.1p Class of Service (CoS)
- IEEE 802.1D Spanning Tree Protocol
- IEEE 802.1v protocol VLAN & port VLAN
- IEEE 802.1w Rapid Spanning Tree Protocol
- IEEE 802.1s Multiple Spanning Tree Protocol
- IEEE 802.3ad link aggregation (Static, LACP)
- IEEE 802.1x port access authentication
- Mac-based VLAN
- IGMP v1, v2, v3 snooping support
- IGMP querier
- Network storm protection, including broadcast, multicast and unicast traffic
- Static multicast filtering
- Ingress rate limit in 1Kbps increments
- Protected port
- Private group VLAN
- Double VLAN
- MAC filter
- Port security
Layer 3 Services
- VLAN routing
- Static routing
- Port-based routing
- Access Control Lists - MAC, IP, TCP
- ACLs - 224 global rules
- DiffServ QoS (RFC 2998)
- DNS caching
- DHCP/BOOTP relay - primary and backup (RFC3046, option 82)
- UDP relay
Switch Management Specifications
- SNMP v1, v2c, v3 with multiple IP addresses
- RFC 1157, 1901-1910, 2574, 2575
- RFC 768 UDP
- UDP relay
- RFC 854-859 telnet
- RFC 951 BOOTP
- RFC 1027 Proxy ARP
- RFC 1213 MIB II
- RFC 1757 RMON groups 1,2,3, and 9
- RFC 1215 SNMP traps
- RFC 1493 bridge MIB
- RFC 1643 Ethernet interface MIB
- RFC 1534 DHCP and BOOTP interoperation
- RFC 2030 Simple Network Time Protocol (SNTP)
- RFC 2131, 2132 DHCP and BOOTP
- RFC 2865 RADIUS (both switch and management access)
- RFC 2866 RADIUS accounting
- Private enterprise MIB
- CPU traffic monitor
- Port mirroring support (many-to-one)
- SYSLOG
- Firmware upgrade via TFTP or HTTP
- Port description
- TACACS+
- LLDP/LLDP-MED
- DHCP server
- DHCP option 81
Single IP Address Management
(firmware version 7.3 or higher)
- Manage up to 48 fully managed switched
- Feature can be used with the following models:
- FSM726E, FSM7226RS, FSM7250RS
- FSM7328S, FSM7352S, FSM7328PS, FSM7352PS
- GSM7224R, GSM7248R
- GSM7328S, GSM7328FS, GSM7352S
User Interfaces
- Command-line interface (CLI) via console port
- Prosafe Control Center Web-based management via embedded HTTP server protected with Secured Sockets Layer (HTTPS)
- (SSLv3) or Transport Layer Security (TLS v1)
- Telnet remote login (5 sessions) securable with Secure Shell (SSH v1.5, v2)
LEDs
- Per port: Speed, link, activity
- Per device: Power, fan status, stack ID, master, RPS
Physical Interfaces
- 24 (FSM7226RS) or 48 (FSM7250RS) RJ-45 connectors for 10BASE-T, 100BASE-X (Auto Uplink and auto negotiate on all ports)
- 2 1000Base-X with optional SFP connectors for fiber connection
- 2 stacking ports at 2.5 Gbps each
- RS-232 console port
Performance Specifications
- Forwarding modes: Store and forward
- Bandwidth:
- FSM7226RS: 18.8 Gbps; 6.5 Mpps
- FSM7250RS: 23.6 Gbps; 10.1 Mpps
- Switch latency: Less than 80 microseconds for 64-byte frames
- System memory: 128 MB
- Packet buffer memory: 1 MB
- Code storage (flash): 32 MB
- MAC addresses size: 8K
- Number of VLANs: 512 (1-4093 ID)
- Number of trunks: 24
- Number of QoS queues: 8
- Number of static routes: 32
- Jumbo frame support: up to 9K packet size
- Number of multicast groups: 256
Electrical Specifications
- Power consumption:
- FSM7226RS - 15W
- FSM7250RS - 33W
- 100-240V AC/50-60 Hz universal input
- External RPS unit (12V)
Physical Specifications
- FSM7226RS
- Dimensions (w x d x h):
440 x 205 x 43 mm
(17.32 x 8.1 x 1.7 in)
- Weight: 2.8 kg (6.2 lb)
- Acoustic noise: (ANSI-S10.12) 36.6 dB
- Heat dissipation: 51 Btu/hr
- Mean time between failures (MTBF):
562,110 hours (~64 years)
- Thermal sensor
- FSM7250RS
- Dimensions (w x d x h):
440 x 257 x 43 mm
(17.32 x 10.1 x 1.7 in)
- Weight: 3.6 kg (7.9 lb)
- Acoustic noise: (ANSI-S10.12) 38.3 dB
- Heat dissipation: 112 Btu/hr
- Mean time between failures (MTBF):
385,102 hours (~44 years)
- Thermal sensor
Environmental Specifications
- Operating temperature: -5° to 50° C (23° to 131° F)
- Storage temperature: -20° to 70° C (-4° to 158° F)
- Operating humidity: 90% maximum relative humidity, non-condensing
- Storage humidity: 95% maximum relative humidity, non-condensing
- Operating altitude: 10,000 ft (3,000 m) maximum
- Storage altitude: 10,000 ft (3,000 m) maximum
Electromagnetic Emissions
- CE mark, commercial
- FCC Part 15 Class A
- VCCI Class A
- EN 55022 (CISPR 22), Class A
- C-Tick
Electromagnetic Immunity
Safety
- CE mark, commercial
- CSA certified (CSA 22.2 #950)
- UL listed (UL 1950)
- CUL IEC 950
- EN 60950
Warranty
- NETGEAR Lifetime Warranty†
Package Contents
- ProSafe L2+ Managed Switch (FSM7226RS or FSM7250RS)
- Power cable
- Null modem cable
- Stack cable
- Rubber footpads for tabletop installation
- Rack-mount kit
- Quick Installation guide
- Resource CD-ROM with user manual
- ProSafe NMS100 30-Day Trial CD-ROM
- Warranty/support information card
NETGEAR Related Products
- 1000BASE-SX SFP GBIC (AGM731F)
- 1000BASE-LX SPF GBIC (AGM732F)
- 1000BASE-ZX SFP GBIC (AGM733)
- NMS100 Network Management Software
ProSupport Service Packs Available
- FSM7226RS
- OnCall 24x7, Category 1
- PMB0331-100 (US)
- PMB0331 (non-US)
- XPressHW, Category 1
- FSM7250RS
- OnCall 24x7, Category 2
- XPressHW, Category 2
Ordering Information
- FSM7226RS
- North America: FSM7226RS-100NAS
- Europe: FSM7226RS-100EUS
- Asia: FSM7226RS-100AJS
- FSM7250RS
- North America: FSM7250RS-100NAS
- Europe: FSM7250RS-100EUS
- Asia: FSM7250RS-100AJS
|