Home > Products > NETGEAR > Switches > Advanced Smart Switches > FS728TP

FS728TP

 

FS728TP

Specification

 

Network Protocol and Standards Compatibility

  • IEEE 802.3 10BASE-T
  • IEEE 802.3u 100BASE-TX
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3z 1000BASE-X
  • IEEE 802.3x full-duplex flow control
  • IEEE 802.3af (Power over Ethernet)

Power Supply

  • Power consumption: 225W maximum
  • 100-240VAC/50-60-Hz universal input
  • PoE budget: 195W

Network Ports

  • 24 10/100 Mbps auto sensing Fast Ethernet
  • 4 10/100/1000 Mbps auto-sensing Gigabit Ethernet switching ports (RJ-45)
  • 2 Dual Personality SFP slots

Physical Specifications

  • Dimensions: (w x d x h) 440 x 257 x 43 mm (17.3 x 10.1 x 1.7 in)
  • Weight: 3.6 kg (7.92 lb)

Electromagnetic Emissions

  • CE mark, commercial
  • FCC Part 15 Class A
  • VCCI Class A
  • C-Tick

Environmental Specifications

  • Operating temperature: 32° to 104° F (0° to 50° C)
  • Storage temperature: -4° to 158° F (-20° to 70° C)
  • Operating humidity: 90% maximum relative humidity, non-condensing
  • Storage humidity: 95% maximum relative humidity, non-condensing
  • Operating altitude: 10,000 ft (3,000 m) maximum
  • Storage altitude: 10,000 ft (3,000 m) maximum

LEDs

  • Per port (10/100 and Gigabit): Link/activity, speed
  • Per device: Power
  • Per PoE port: PoE Power, PoE fault

Electromagnetic Immunity

  • EN 55024

Safety

  • CE mark, commercial
  • cUL IEC 950/EN 60950

Administrative Switch Management

  • IEEE 802.1Q static VLAN (128 groups, static)
  • IEEE 802.1p Class of Service (CoS)
  • Port-based QoS
  • DSCP-based QoS
  • IEEE802.3ad link aggregation (manual or LACP)
  • IEEE 802.1D Spanning Tree Protocol
  • SNMP v1, v2c, v3
  • RFC 1213 MIB II
  • RFC 1643 Ethernet interface MIB
  • RFC 1493 bridge MIB
  • RMON group 1, 2, 3, 9
  • RFC 2131 DHCP client
  • IEEE 802.1x
  • Port-based security by locked MAC addresses
  • MAC ACL
  • Storm control for broadcast, multicast and unknown unicast packets
  • IGMP snooping v1/v2
  • Port-based ingress and egress rate limiting
  • SNTP
  • Port mirroring support (many to one)
  • Web-based configuration
  • Configuration backup/restore
  • Password access control
  • RADIUS Support
  • TACACS+ support
  • Syslog
  • Firmware upgradeable

Performance Specifications

  • Forwarding modes: Store-and-forward
  • Bandwidth: 12.8 Gbps
  • Network latency: <20μs for 64-byte frames in store-and-forward mode for 100 Mbps to 100 Mbps transmission
  • Buffer memory: 3MB per system
  • Address database size: 8,000 media access control (MAC) addresses per system
  • Addressing: 48-bit MAC address
  • Mean time between failures (MTBF): 176,000 hours (~20 years)
  • Acoustic noise: 49 dB

Modules

  • AGM731F 1000BASE-SX SFP Module
  • AGM732F 1000BASE-LX SFP Module
  • AGM733 1000BASE-ZX SFP Module

Warranty

  • NETGEAR Lifetime Warranty†

ProSupport™ Service Packs Available
OnCall 24x7, Category 1

  • PMB0331-100 (US)
  • PMB0331 (non-US)

XPressHW, Category 1

  • PRR0331

Package Contents

  • 24-port PoE Smart Switch with Gigabit Ports (FS728TP)
  • Rubber footpads
  • Power cord
  • Rack-mount kit
  • Resource CD
  • Installation guide
  • Warranty/support information card
  • Category 5 UTP cable

Ordering Information

  • North America: FS728TP-100NAS
  • Europe: FS728TP-100EUS
  • Asia: FS728TP-100AUS
  • Japan: FS728TP-100JPS

 

Copyright 2012© ICT Technologies & Services Limited. All right reserved.