Home > Products > NETGEAR > Switches > Smart Switches > FS726TP

FS726TP

 

FS726TP

Specification

 

Network Protocol and Standards Compatibility:

  • IEEE 802.3 10BASE-T
  • IEEE 802.3u 100BASE-TX
  • IEEE 802.3ab 1000BASE-T
  • IEEE 802.3z 1000BASE-X
  • IEEE 802.3x full-duplex flow control
  • IEEE 802.3af (Power over Ethernet)

Power Supply

  • Power Consumption: 122W maximum
  • 100-240VAC/50-60 Hz universal input
  • PoE Budget: 100W

Network Ports

  • 24 10/100 Mbps auto sensing Fast Ethernet
  • 2 10/100/1000 Mbps auto-sensing Gigabit Ethernet switching ports (RJ-45)
  • 2 SFP slots

Physical Specifications

  • Dimensions (W x D x H): 440 x 205 x 43 mm (17.8 x 8.1 x 1.6 in.)
  • Weight: 3.0 kg (6.6 lb)

Electromagnetic Emissions

  • CE mark, commercial
  • FCC Part 15 Class A
  • VCCI Class A
  • C-Tick

LEDs

  • Per port: (10/100 and Gigabit): Link/ Activity, Speed
  • Per device: Power
  • Per PoE ports: PoE Power, PoE fault

Electromagnetic Immunity

  • EN 55024

Safety

  • CE mark, commercial
  • cUL IEC950/EN60950

Administrative Switch Management

  • IEEE 802.1Q Static VLAN (Up to 64)
  • Port-based VLAN (Up to 26)
  • IEEE 802.1p Class of Service (CoS)
  • Port-based QoS
  • DSCP – Layer 3 QoS
  • IEEE802.3ad (manual) Link Aggregation
  • IEEE 802.1D Spanning Tree Protocol
  • RFC 1157 SNMP v1
  • RFC 1213 MIB II
  • RFC 1643 Ethernet Interface MIB
  • RFC 1493 Bridge MIB
  • RFC 2131 DHCP client
  • Private Enterprise MIB
  • Rate Limiting
  • Static IGMP and IGMP Snooping v1
  • Port Mirroring Support
  • Web-based configuration
  • Configuration Backup/Restore
  • Password Access Control
  • Firmware upgradeable

Performance Specifications

  • Forwarding modes: Store-and-forward
  • Bandwidth: 8.8 Gbps
  • Network latency: <20μs for 64-byte frames in store-andforward mode for 100 Mbps to 100 Mbps transmission
  • Buffer memory: 256 KB embedded memory per unit
  • Address database size: 8,000 media access control (MAC) addresses per system
  • Addressing: 48-bit MAC address
  • Mean time between failure (MTBF): 327,000 hours (~37 years)
  • Acoustic Noise: 41.8 dB

Modules

  • AGM731F 1000BASE-SX SFP Module
  • AGM732F 1000BASE-LX SFP Module
  • AGM733 1000BASE-ZX SFP Module

Warranty

  • NETGEAR Lifetime Warranty†

ProSupport™ Service Packs Available
OnCall 24x7, Category 1

  • PMB0331-100 (US)
  • PMB0331 (non-US)

XpressHW, Category 1

  • PRR0331

Package Contents

  • 24-port Smart Switch with Gigabit Ports (FS726TP)
  • Rubber footpads
  • Power cord
  • Rack-mount kit
  • Resource CD
  • Installation guide
  • Warranty/support information card

NETGEAR Related Products

  • 32-bit PCI Copper Gigabit Adapter (GA311)
  • 1000BASE-SX SFP Module (AGM731F)
  • 1000BASE-LX SFP Module (AGM732F)
  • 1000BASE-ZX SFP Module (AGM733)
Ordering Information
  • North America: FS726TPNA
  • Europe: FS726TPEU
  • Asia: FS726TPAU
  • Japan: FS726TPJP

 

Copyright 2012© ICT Technologies & Services Limited. All right reserved.